Product
Laser linear polarization cube beam splitter
Classification:
Detail
Parameters
Technical Data
Optimized for higher power lasers
Extinction ratio of laser line beam splitter> 1000:1
Extinction ratio of UV laser beam splitter> 100:1
low wavefront distortion
Features
constructed with a pair of right angle prisms
These beam splitters consist of a pair of precise right-angle prisms that are carefully glued together to minimize wavefront distortion. The hypotenuse of one of the prisms is coated with a laser line dielectric beamsplitter coating. All four sides are coated with a broadband multilayer dielectric coating as an anti-reflection coating to minimize surface reflection losses over the entire wavelength range.
appropriate direction
A prism beam splitter is formed by gluing two right-angle prisms together. The hypotenuse of one of the prisms is coated with a partially reflective metal-dielectric coating. In the Newport prism beam splitter, the coated prism has a clearly visible point as a mark. The incident light should enter the prism through the hypotenuse with the coating to minimize the power passing through the optical cement. A beam entering through an uncoated prism would otherwise produce more than three times the fluence in the cement (transmission component plus double pass of the reflection component). Higher power beams may cause degradation of the bonding agent.
High polarization extinction ratio
The unpolarized beam is split into two orthogonal linearly polarized components. P-polarized light is transmitted and S-polarized light is reflected, both with negligible light absorption. The extinction ratio is better than 1000:1 for beam splitters made of N-BK7 glass and 100:1 for beam splitters made of UV fused silica. These cubes are recommend for use in pulsed laser systems and for purifying polarization in multimode, high power lasers. The multi-layer laser circuit coating provides 13 laser wavelengths.



Other Products
I want to consult