All Categories >

Product

+
  • 宽带偏振立方体分束器.jpg

Broadband Polarizing Cube Beam Splitter

A broadband polarizing cube beam splitter provides efficient polarization for multiple or tunable sources. Each polarizer consists of a pair of precise right-angle prisms carefully glued together to minimize wavefront distortion.

Classification:

Detail

Parameters

Technical Data

The average extinction ratio is greater than 500:1 and 1000:1.

Superior broadband performance

low wavefront distortion

Features

constructed with a pair of right angle prisms

These beam splitters consist of a pair of precise right-angle prisms that are carefully glued together to minimize wavefront distortion. The hypotenuse of one of the prisms is coated with a metal-dielectric hybrid beam-splitting film optimized over a wide wavelength range. All four sides are coated with a broadband multilayer dielectric coating as an antireflective coating to minimize surface reflection losses over the entire wavelength range. Due to the metallic nature of the hybrid coating, these beam splitters cannot be used for higher power lasers.

appropriate direction

A prism beam splitter is formed by gluing two right-angle prisms together. The hypotenuse of one of the prisms is coated with a partially reflective metal-dielectric coating. In the Newport prism beam splitter, the coated prism has a clearly visible point as a mark. Incident light should enter the prism through the hypotenuse with the coating to minimize power loss through the optical cement. A beam entering through an uncoated prism would otherwise produce more than three times the fluence in the cement (transmission component plus double pass of the reflection component). Higher power beams may cause degradation of the bonding agent.

broadband multilayer coating

Four broadband multilayer coatings are available, covering the 420 - 680 nm, 620 - 1000 nm, 900 - 1300 nm and 1200 - 1600 nm wavelength ranges. A non-linearly polarized beam is split into two orthogonal linearly polarized components. p-polarized light is transmitted, s-polarized light is reflected, and the absorption of both is negligible. The extinction ratio is better than 500:1, but the average is 1000:1.

宽带偏振立方体分束器

 

宽带偏振立方体分束器

宽带偏振立方体分束器

Broadband Polarizing Cube Beam Splitter

Other Products

I want to consult

Submission