Product
ZDT-B series swing rod air suspension isolator
Classification:
Detail
Parameters
Technical Data
▪ External adjustable dampers can be set according to the on-site environment to reduce resonance risk
▪ Ultra thin airbags reduce the impact of their own stiffness on the natural frequency of the system
▪ The principle of a pendulum can achieve lower horizontal natural frequencies
▪ High precision pneumatic control system, sensitive, fast, safe, and stable
▪ Automatic leveling
▪ Optional installation of casters

The isolation support adopts ultra-thin composite material airbags and multi small hole quasi laminar damping technology with additional diffusion ports. A pendulum group structure is added inside, which is based on the principle of a single pendulum. The required length of the pendulum is calculated based on the relationship between the length of the pendulum and frequency, and a damping slice group is added inside to solve the problem of undamped oscillation; The overall vibration isolation performance is good, and the system is stable. Automatic leveling, automatic inflation, silent air compressor air source, low noise.
The swing rod air suspension isolator is an improved version of the air suspension isolator, which has better horizontal isolation performance. While ensuring that the vertical natural frequency is less than 2Hz, its horizontal natural frequency can reach 1Hz. To overcome the problem of poor horizontal vibration isolation characteristics of constrained airbags, the structure basically follows the law of single pendulum ω n=. Due to the three suspension rods constraining the swing rod variation, the structure is a twisted dry friction pendulum, and the sliding friction between the swing rod and the bottom surface of the three suspension rods constraining the swing is small, resulting in low resistance and minimal increase in natural frequency. Although the three suspension rods are relatively prone to oscillation compared to single pendulums, there are also unstable factors. Therefore, we have installed dampers in the isolator to change the vibration period, greatly reducing the vibration period and the amplification effect of the resonance zone. This reduces the horizontal natural frequency to 1Hz.
Application field:
Microscope, Medical Biology
Optical path testing and optical measurement
Laser scanning and laser interference
Spectral experiments and precision detection
Integrated Electronics
Instruments and equipment with very high vibration requirements
Performance indicators:
Natural frequency
Vertical: 1.0-2.0Hz Horizontal: 1.0Hz
Isolation efficiency
Vertical: 86-92% at 5Hz; At 10Hz: 90-95%
Horizontal: 88-94% at 5Hz; At 10Hz: 92-98%
Vibration isolation method
Air spring swing rod isolation
Leveling method
Automatic leveling
Damping method
Multi hole air damping
working pressure
0.2~0.4MPa
Repetitive positioning accuracy
±0.1mm
Adjusting height
±10mm
recovery time
<5s
Casters
Optional installation of casters
Other Products
I want to consult