Product
Terahertz photoconductive antenna
Classification:
Detail
Parameters
Technical Data
Terahertz transmitter or receiver for time-domain spectroscopy
Terahertz emission: 0.1 THz - 3 THz
The center wavelength of femtosecond laser input needs to be 800 nm
Low bias voltage: ± 15 V
Integrated 39.0 inch (990mm) coaxial cable with BNC male
TX-003 photoconductive antenna can be used as a terahertz transmitter or receiver in the frequency range of 0.1 - 3 THz. For both usages, the antenna requires a focused linearly polarized femtosecond laser pulse input with a center wavelength of about 800 nm. The polarization direction of the input light needs to be parallel to the polarization axis indication line engraved on the light input side of the antenna. The input beam is focused by a microlens array onto a cross-structured GaAs antenna. For more information about the antenna structure, see the Antenna Design tab.
When the TX-003 antenna is used as a terahertz transmitter, only a low bias voltage of ± 15 V is required because the microlens array can effectively generate terahertz radiation. A superhemispherical silicon lens on the terahertz output side of the antenna is used to collect and direct the terahertz radiation into a divergent beam with a divergence angle of 15 °, measured with respect to the optical axis. This beam can be collimated or refocused using a terahertz lens or an off-axis parabolic mirror. For complete specifications of the required light input and expected terahertz output, please check the Specifications tab.
If a TX-003 antenna is used as the receiver, a femtosecond laser and terahertz input are required.


Previous
Next
Previous
Next
Other Products
I want to consult