Product
Universal Base Plate
Classification:
Detail
Parameters
Technical Data
Compatible with imperial or metric breadboards, pins and stands
1.25 inch (31.8mm) long countersunk hole slot for 1/4 inch (M6) cap screws for rotation and translation
Threaded holes:
1/4 "-20 (M6) (6)
8-32 (M4) (16)
4-40 (4)
Countersunk hole:
1/4 "(M6) (4, two on one side)
DB-001#8 (M4) (4, two on one side)) The universal base plate provides mounting holes in almost all directions, which can flexibly install optical equipment on the optical platform or breadboard. This degree of freedom allows users to install various components or platforms in different hole array orientations in addition to the standard 1-inch (25mm) hole array. The countersunk holes in the mounting plate also allow metric elements to be adapted to the imperial optical platform and vice versa.
The inch size of this base plate is 2.5 inches x 2.5 inches x 3/8 inches, and the metric size is 65mm x 65mm x 10mm. There is a 1.25 inch (31.8mm) long countersunk hole slot in the center for 1/4 inch (M6) cap screws for 360 ° rotation and rough translation. The 1/4 inch -20(M6) and 8-32(M4) threaded mounting hole arrays facilitate the installation of components from different directions, while the four 4-40 threaded holes are used to be compatible with our 30 mm cage system. Two types of counterbores for 1/4 inch (M6) and #8(M4) cap screws are located on both sides of the base plate and can be used to install the optical post assembly.
Countersunk holes for 1/4 inch (M6) cap screws are located at the two corners of each side of the base plate, forming a diagonal line. The countersunk holes for the #8(M4) cap screws are located on the centerline of the vertical hole slot. The hole spacing is 2 inches (50.0mm) on the upper surface and 1 inch (25.0mm) on the lower surface. For details see mechanical drawing of technical data

Previous
Next
Previous
Next
Other Products
I want to consult