Product
Fork clamping block
Classification:
Detail
Parameters
Technical Data
Fix the Ø12mm base post or base post bracket to the breadboard or optical platform
The CSJK-001 has a countersunk hole slot 0.63 inches (15.9mm) long for (M3) cap screws
CSJK-002 with 0.59 inch (14.9mm) long countersunk slots, 8-32(M4) cap screws
CSJK-003 with 0.63 inch (15.9mm) slot, 1/4 "-20(M6) cap screw
Rotate the fork part 360 ° to select the most convenient mounting hole
When used with our Ø12mm base post or base post bracket (sold forward), our fork clamp can provide good clamping force. These fork clamps are highly flexible and suitable for building installations consisting of mini-series components and opto-machine components. The CSJK-001 and CSJK-002 are made of anodized aluminum, and the CSJK-003 is made of 17-4PH stainless steel that has been precipitation hardened to provide uniform clamping force.
CSJK-001 and CSJK-003 are used with mini-series breadboards and are compatible with (M3) and (M4) cap screws respectively. The CSJK-002 slot is compatible with (M6) cap screws, allowing the mini-series pins and components to be integrated into standard breadboards, optical platforms and devices on mini-series breadboards.
The lower surface of each fork clamp block has a gasket to provide maximum stability when locking the adapter rod with the clamp block through washers and cap screws. Note that over-tightening the fork clamp may distort the surface of the optical table and cause the components to misalign.

Previous
Next
Previous
Next
Other Products
I want to consult