All Categories >

Product

+
  • 大面积旋转面包板.jpg

Large rotating breadboard

The breadboard has a dovetail edge and three lockable adjustable mounts. Using the included 2.5mm hex wrench, it can be installed anywhere on the periphery with three fixing screws. The mount also includes slotted holes, with which adjustable positioning provides flexibility when securing the breadboard to an optical table or other work surface.

Classification:

Detail

Parameters

Technical Data

360 ° Manually Operate Rotation

Available in 3 sizes: Ø6 inch (Ø150mm), Ø12 inch (Ø300mm) or Ø18 inch (Ø450mm)

Standard 1/4 "-20(1 inch pitch) or M6(25mm pitch) hole pattern

0.5 INCHES (12.7mm) THICKNESS

Position locking mechanism

Black oxidized aluminum construction

This large-area rotary displacement stage can be selected in three sizes: 6 inches (150mm), 12 inches (300mm) or 18 inches (450mm), and the threaded hole pattern is the standard 1/4 inch -20 (spacing 1 inch) or M6 (spacing 25mm). The thickness of the breadboard is 0.5 inches (12.7mm), which is the same thickness as our standard solid aluminum breadboard. They are designed for applications where rough angle adjustment of optical components is required. There is a Ø91mm(Ø3.58 inch) part in the middle of the breadboard that can be removed to facilitate the placement of other components in the middle. At this time, the breadboard rotates around the central component (see the picture on the right). On the edge portion of the rotating surface, a scale is engraved with a laser at an interval of 1 °. Positioning can be done simply by manually rotating the stage.

The breadboard has a dovetail edge and three lockable adjustable mounts. Using the included 2.5mm hex wrench, it can be installed anywhere on the periphery with three fixing screws. The mount also includes slotted holes, with which adjustable positioning provides flexibility when securing the breadboard to an optical table or other work surface. The image on the right shows a prism beamsplitter built using the RBB12A; for details on the device, please see the Application Example tab.

The Ø91mm(Ø3.58 inches) detachable part in the middle of the breadboard can be replaced by an adapter RBBA1(/M)(purchased separately) with an SM1 thread (1.035 inches -40) center through hole. After mounting the rotating platform to the post, the adapter allows the beam to be projected upward through a mirror mounted at the bottom of the breadboard surface. Various optical elements can be mounted on the adapter for different purposes, as shown in the device on the right. In this setup, the RBB12A breadboard rotates around an elliptical optical element mount, which is mounted by the RBBA1 insert. Using a mirror mounted below the rotating breadboard, the laser beam is projected through the center of the breadboard onto a second mirror, which directs the beam onto the detector. When the breadboard is mounted by the post, make sure that the clamp is not assembled too tightly. An over-tightened screw will hinder the rotation of the breadboard. Please note that the breadboard requires more torque to rotate with the heavier load mounted on the platform.

大面积旋转面包板

Large rotating breadboard

Other Products

I want to consult

Submission