Product
Optical chopper and chopping blade
Classification:
Detail
Parameters
Technical Data
Characteristics
● A crystal-stabilized phase-locked feedback loop suppresses low-frequency drift and phase jitter.
● Sum and difference frequency outputs of harmonics, subharmonics, and fractional harmonics
● Microprocessor control
● Offers single-frequency and dual-frequency blades
● Harmonic blades for pump-probe and other nonlinear experiments
● Save and recall user settings in non-volatile RAM
● USB port
● Includes control software
The MC2000B optical chopper is a precision instrument that employs advanced technology to modulate a continuous light beam. Its controller features a phase-locked loop (PLL)‑based motor speed control, enabling it to maintain the chopping rate and phase with high accuracy relative to a reference signal. An internally crystal‑stabilized frequency synthesizer provides a precise and stable reference frequency, ensuring long-term stability. Compared with the previous‑generation MC2000, the MC2000B chopper offers faster lock‑in times, an improved interface, and a wider selection of chopper blades.
When the chopper blade passes through and interrupts the optical path, a光开关 can be used to generate a reference signal. This switch incorporates an LED with a wavelength range of 850 nm to 940 nm and operates at a threshold current of 15 mA, thereby minimizing the LED’s light output.
Compared with traditional open-loop speed control designs, the PLL-based speed control circuit can synchronize the MC2000B chopper with an external reference signal, including its own MC2000B chopper and a reference source similar to that of a DSP lock-in amplifier. For more details on the MC2000B chopper and its applications, please refer to the “Applications” tab.
The MC2000B chopper employs a high‑quality DC motor with rare‑earth magnets. The blades of the photolithography‑grade optical chopper wheel are crafted from 0.01‑inch‑thick blue clock spring steel, ensuring exceptional precision. The chopper features a compact design and a wide base for enhanced stability; the base includes tapped holes that accommodate two 1/4″‑20 (M6) screws, with a center‑to‑center spacing of 3 inches (76.2 mm). The mounting slots have a radius of 1.5 inches (38.1 mm). For convenient setup, the interface cable utilizes a circular snap‑in Hirose connector.
The MC2000B controller features a 240 x 128‑pixel graphical display, enabling configuration and monitoring of chopper functions. All functions can be accessed via a control knob on the front panel, which incorporates rotary and push‑button controls. Multiple user settings can be easily stored in nonvolatile memory and recalled as needed. A USB interface is included as standard for remote PC control. Each controller comes with GUI‑based software that allows control of the MC2000B; the software is also available for download from the product’s website. Additionally, the software supports programming the MC2000B using C++ or LabVIEW.
Please note: The chopper should be kept away from stray light sources, as optical sensors can experience jitter due to light pollution.
Optical Chopper System
● Harmonic, subharmonic, and fractional-harmonic chopping
● Sum-and-difference reference output
● Features high-precision 10-slot blades (see MC1F10HP below)
Other vendor compatibility
The MC2000B chopper is compatible with blades from other manufacturers. Blades from Scitec Instrument—specifically the 300D3/30, 300D8/60, 300D4/7, and 300D53/60—can all be used with this chopper; however, due to minor design differences, not all functions may be fully supported. Please note that we cannot guarantee compatibility between blades from other manufacturers and our chopper head, and such incompatibility may result in damage.
The MC2000B is shipped with a 120VAC U.S.-style power cord, while the MC2000B-EC is shipped with a 230VAC European‑style power cord. For other types of power cords, please contact Technical Support before placing your order.
Optical chopper blades, single-frequency and dual-frequency
● Single-frequency blades are suitable for chopping applications in the 4 Hz–10 kHz range.
● The MC1F10HP dual-frequency blade features 10/100 slots (also available on the MC2000B[-EC] chopper system)
● The MC1F10A’s adjustable 10‑slot vane features a user‑adjustable duty cycle.
● The maximum supported beam diameter is 26.1 mm.
● Made from blue clock spring steel with a thickness of 0.01 inches
These blades broaden the chopping frequency range of the MC2000B optical chopper. The MC1F10HP high‑precision dual‑frequency blade is the standard blade included with the MC2000B. Our high‑precision blades—models MC1F10HP, MC1F2, and MC1F2P10—deliver stable chopping frequencies with minimal jitter. The controller achieves this stability by tracking the external grooves on these precision blades.
The MC1F10A adjustable 10‑slot vane consists of two discs, with an adjustable duty cycle. After setting the duty cycle to the desired value (between 0% and 50%), be sure to tighten the mounting screws.
Please note that all blades used with the previous‑generation MC2000 optical chopper are compatible with our MC2000B chopper, except for the MC2F57 blade, which has been replaced by the MC2F57B blade (see the Harmonic Optical Chopper Blades section below).

● Each MC2000B (-EC) optical chopper system includes an MC1F10HP blade. This high‑precision blade offers stable chopping frequency, low jitter, and a chopping rate as low as 10 kHz. To achieve this, the blade is equipped with 100 external grooves for synchronization and can also be used for chopping.
● These high-precision blades feature stable chopping frequencies, low jitter, and a frequency as low as 200 Hz. To achieve this, the blades are equipped with 100 small external grooves for synchronization.
● The duty cycle of the MC1F10A 10-slot blade can be adjusted within the range of 0% to 50%. The maximum beam diameter depends on the selected duty cycle.
● This indicates whether the rotary encoder is backward compatible with our previous-generation MC2000 (-EC) optical chopper.
● When the blade is rotating, to maximize the signal slope—i.e., to minimize the time required for the beam to reach full open or full closed—the beam should be focused on the widest portion of the chopper blade’s slot.
● The maximum beam diameter at the widest portion of the chopper wheel’s groove is indicated by the red circle in Figure G2.1.
● The maximum beam diameter at the 100‑slot section of the dual‑frequency MC1F10HP blade can be determined.
● The maximum beam diameter at the center of the chopper wheel groove is indicated by the green circle in Figure G2.1.
● The maximum beam diameter at the narrowest portion of the chopper wheel’s groove is indicated by the blue circle in Figure G2.1.
Optical chopper blade, harmonic frequency
● Highly suitable for ratio experiments and pump–probe experiments
● The blade can be used in chopping applications ranging from 8 Hz to 6 kHz.
● The maximum supported beam diameter is 14.66 mm.
● Made from blue clock spring steel with a thickness of 0.01 inches
These harmonic‑frequency blades feature both outer and inner grooves, enabling the splitting of a single beam and its independent modulation. For more details, please see… Work Tags. Our blades are made from blue clock spring steel with a thickness of 0.01 inches. These blades are not compatible with our previous-generation MC2000 optical chopper.

Other Products
I want to consult