All Categories >

Product

+
  • 237a8d9b-c68c-4d18-a295-7abf3900cb14.png

Zero-order vortex half-wave plate

Converts linearly polarized light into radially and azimuthally polarized light; vortex waveplates available with m = 1 or m = 2; transforms a Gaussian beam into a hollow beam; offers laser line waveplates spanning 532 to 1550 nm and broadband achromatic waveplates covering 480–700 nm.

Classification:

Detail

Parameters

Technical Data

Zero-order vortex half-wave plate

● Convert linearly polarized light into radially and azimuthally polarized light

● Optional vortex waveplates with m = 1 or m = 2

● Converting a Gaussian beam into a hollow beam

● Offers laser line waveplates spanning 532 to 1550 nm and broadband achromatic waveplates covering 480–700 nm.

Characteristics

● True Zero-order Vortex Half-wave Plate

● Controlling radial polarization and azimuthal polarization

● Offers vortex waveplates with m = 1 or m = 2 (see the comparison tab)

● Center wavelength options ranging from 532 to 1550 nm, or a broadband achromatic option from 480 to 700 nm (see the specifications tab)

● Compatible with beam diameters ranging from Ø300 µm to Ø21.5 mm

● Large incident angle: the laser line vortex wave plate tolerates ±20°, whereas the achromatic wave plate tolerates ±30°.

● Customizable vortex waveplates

Chongfan Technology’s liquid crystal polymer (LCP) vortex half-wave plates are designed to modify the radial and azimuthal polarization of an optical field. These vortex waveplates exhibit a uniform retardance across the entire clear aperture, while their fast axis continuously rotates across the surface of the optic. We offer vortex waveplates with m = 1—identified by the model prefix WPV10L or the full model number AWPV10L‑550—and with m = 2—identified by the model prefix WPV10 or the full model number AWPV10‑550. The distinction between these two orders lies in the differing distribution of the fast axis across the waveplate’s clear aperture, resulting in distinct polarization patterns when linearly polarized light is incident.

These waveplates are mounted in aluminum housings and feature alignment marks etched around the perimeter to indicate the waveplate’s center, facilitating beam alignment. Additionally, m = 1 waveplates bear a three‑line mark that denotes the fast axis direction at zero degrees. Each LCP vortex waveplate consists of an LCP film sandwiched between two 1 mm‑thick Ø23 mm N‑BK7 glass substrates. A light‑alignment technique orients the LCP molecules, generating a continuously rotating fast axis whose rotation center coincides with the waveplate’s geometric center. Due to their design, laser‑line waveplates accommodate a broad angle of incidence (AOI) of ±20°, whereas achromatic waveplates tolerate up to ±30°. Furthermore, these vortex waveplates are compatible with beams ranging in diameter from 21.5 mm (0.84 inches) down to 0.3 mm (0.01 inches).

These waveplates can convert a standard TEM00 Gaussian beam into a “hollow‑core” Laguerre–Gaussian mode, as shown in Figure 1.2. Waveplates with m = 1 and m = 2 can both generate hollow‑core beams; however, the final beam exhibits different polarization states (see the Comparison tab for more details). In general, compared to an m = 2 waveplate, an m = 1 waveplate produces a smaller, more circular hollow‑core beam. Laser line vortex waveplates should be operated at a single wavelength close to their design wavelength; the greater the deviation from the design wavelength, the poorer the quality of the hollow‑core beam profile. Achromatic vortex waveplates do not show a degradation in the hollow‑core beam profile across their specified operating wavelength range. Such achromatic vortex waveplates are particularly well suited for exoplanet imaging using vortex coronagraphs.

Although the nominal rotation axis of the fast axis is located at the center of the glass substrate, it varies from one waveplate to another, with deviations within ±1 mm. The scribed lines on the device housing roughly indicate the central position.

Both surfaces are coated with an anti-reflection film to enhance the transmission of the vortex wave plate within its wavelength range. They are mounted in a thin-walled Ø1‑inch housing and are compatible with many of our Ø1‑inch optical mounts, including XY translation mounting base 。

Zero-order vortex half-wave plate: m = 1

● Generation of an m = 2 vortex polarization pattern from linearly polarized light

● Center wavelength options between 532 and 1550 nm

● ±20° large angle of incidence

These true zero-order, m = 1 vortex half-wave plates are designed to modify the radial and azimuthal polarization of the optical field. They exhibit constant retardance across the clear aperture, while their fast axis rotates continuously over the optical element (see Curve Tags). When observed with a white-light source through orthogonal polarizers, these half-wave plates produce an intensity distribution exhibiting two modulation periods. Consequently, when a linearly polarized light source is used, these half-wave plates generate a polarization pattern with m = 2.

m = 1 half-wave plate, compared to the m = 2 half-wave plate sold below, can produce a smaller and more circular hollow‑spot intensity profile (see Comparison Tags). Furthermore, these half-wave plates are polarization-sensitive components; if the fast axis of the wave plate is oriented at a different angle relative to the polarization axis of the incident beam, the resulting output polarization will also differ.

These half-wave plates are mounted in aluminum housings, and the engraved lines on the exterior help align the beam with the center of the half-wave plate. The fast axis at zero degrees is indicated by three lines.

Zero-order vortex half-wave plate: m = 2

● Generation of an m = 4 vortex polarization pattern from linearly polarized light

● Center wavelength options between 532 and 1550 nm

● ±20° large angle of incidence

These true zero-order, m = 2 vortex half-wave plates are designed to modify the radial and azimuthal polarization of the optical field. They exhibit constant retardance across the clear aperture, while their fast axis rotates continuously over the optical element (see Curve Tags). When observed with a white-light source through orthogonal polarizers, these half-wave plates produce an intensity distribution exhibiting fourfold modulation. With a linearly polarized light source, these half-wave plates generate a polarization pattern with m = 4.

The m = 2 half-wave plate will produce a larger, more elliptical hollow‑core intensity distribution compared to the m = 1 half-wave plate sold above.

These half-wave plates are polarization‑insensitive components; regardless of the orientation of the plate’s fast axis relative to the polarization axis of the incident beam, they produce output light with a similar polarization state. The half-wave plates are mounted in aluminum housings, and alignment marks on the exterior facilitate precise centering of the beam relative to the plate.

Zero-order achromatic vortex half-wave plate: m = 1 or m = 2

● Generation of vortex polarization patterns with m = 2 or m = 4 from linearly polarized light.

● A wide wavelength range from 480 to 700 nm

● ±30° large angle of incidence

These achromatic vortex half-wave plates, with m = 1 or m = 2, are designed to modify the radial and azimuthal polarization of the optical field. They exhibit a constant retardance across the clear aperture, while their fast axis rotates continuously over the optic (see the curve labels). When viewed with a white-light source through orthogonal polarizers, these half-wave plates produce intensity patterns modulated by 2 or 4 fringes (see Figures G1.1 and G2.1). Consequently, when used with a linearly polarized light source, they generate polarization patterns corresponding to m = 2 or m = 4. The hollow‑core intensity profiles produced by these achromatic waveplates remain constant throughout their wavelength range.

m = 1 The AWPV10L-550 waveplate is a polarization‑sensitive element; accordingly, its output polarization varies depending on the relative orientation between the waveplate’s fast axis and the polarization axis of the input beam. m = 2 The AWPV10-550 waveplate is not polarization‑sensitive and thus produces an output polarization that is independent of the input beam’s orientation. These half‑wave plates are mounted in aluminum housings, with alignment marks on the periphery to facilitate centering the beam relative to the plate. For the m = 1 vortex waveplate, the zero‑degree fast axis is indicated by three lines.

 

Zero-order vortex half-wave plate

Other Products

I want to consult

Submission