All Categories >

Product

+
  • 63a24b22-382a-493d-8578-c83f0e2fe6fe(1785395786384).png

Quartz vortex wave plate

The quartz vortex retarder is fabricated on a UVFS substrate and incorporates an internally induced birefringent micro‑nanostructure within the quartz. It is supplied as a 1‑inch bare die, without an external housing.

Classification:

Detail

Parameters

Technical Data

● UVFS substrate, 1-inch bare die, without mechanical housing

● Operating wavelength λ: 355 nm, topological charge: 1

● Planar structure, polarization-dependent, high damage threshold

● The fast-axis orientation of the birefringent microstructure is radially uniform across the substrate, with a continuous angular gradient.

● Can be used to generate vectorial polarized beams and vortex beams, exhibiting a central‑hole‑shaped intensity profile.

● Supports flexible customization of parameter specifications

The Quartz Vortex Retarder is fabricated on a UVFS substrate and incorporates an internally induced birefringent micro‑nanostructure within quartz. It is offered as a 1‑inch bare chip, without an external housing. Within the substrate, the fast axes of the birefringent microstructures are arranged in a continuously rotating angular pattern, yielding a uniform λ/2 retardance across the entire device plane; it is a single‑wavelength component. The Quartz Vortex Retarder exhibits polarization‑dependent optical behavior: depending on the polarization state of the incident beam, it can generate vortex beams with helical wavefronts when circularly polarized light is incident (with the output circular polarization exhibiting opposite handedness), and vectorial beams when linearly polarized light is used. Compared with conventional spiral phase plates, the Quartz Vortex Retarder achieves efficient vortex‑beam generation through sophisticated polarization control, offering greater flexibility. Its planar design, free of physical protrusions or recesses, facilitates easy integration. Moreover, unlike many vortex retarders, it is operable in the ultraviolet spectral range, and its choice of substrate ensures a high damage threshold at these wavelengths. Chongfan Technology provides standard Quartz Vortex Retarders with a nominal operating wavelength of 355 nm and a topological charge of m = 1, while also supporting flexible customization of parameters to meet diverse application requirements.

Quartz vortex waveplate, operating wavelength 355 nm

● Clear aperture 10×10 mm, topological charge m=1

● Made of pure UVFS material, with a high damage threshold and high transmittance.

● Compatible with 1-inch optical component mount

Chongfan Technology’s m=1 quartz vortex waveplate features a birefringent microstructure in which the fast-axis orientation rotates by 180° over a 360° angular span along the substrate’s circumferential direction. Its clear aperture measures 10 × 10 mm, and its surface morphology under linearly polarized light is shown in the figure on the right. The m=1 vortex waveplate is suitable for incident beams with diameters ranging from Ø1 mm to Ø9 mm. When illuminated with circularly polarized light, it generates Laguerre–Gaussian beams carrying orbital angular momentum l = ±1; when illuminated with linearly polarized light, it produces vectorial polarization states, including two special cases: radially polarized beams and azimuthally polarized beams.

Microstructure of m=1 quartz vortex wave plate under polarized light

Quartz vortex wave plate

Other Products

I want to consult

Submission