All Categories >

Product

+
  • 5cff80ab-1997-4a81-bd05-5b1ef3aacf35.png

Fiber-coupled electro-optic modulator

Fiber‑coupled electro‑optic phase modulators leverage the electro‑optic effect of lithium niobate crystals to achieve phase modulation of optical signals. They employ titanium‑diffusion or proton‑exchange techniques to fabricate optical waveguides, enabling either dual‑polarization or single‑polarization phase modulation. Featuring low insertion loss, high modulation bandwidth, and a low half‑wave voltage, these devices are widely used in high‑speed optical communication systems for controlling optical chirp, introducing phase delays in coherent communication systems, generating sidebands, performing phase modulation in quantum communications, and mitigating stimulated Brillouin scattering (SBS) in analog fiber‑optic communication systems. For applications with specific requirements regarding operating wavelength, insertion loss, half‑wave voltage, or other parameters, please contact Chongfan’s customer service for customized consultation.

Classification:

Detail

Parameters

Technical Data

● Operating wavelength coverage: 730–880 nm, 960–1100 nm, and 1550 nm

● Half-wave voltage Vpi@50kHz<5.5 V

● Insertion loss < 4 dB

Fiber‑coupled electro‑optic phase modulators leverage the electro‑optic effect of lithium niobate crystals to achieve phase modulation of optical signals. They employ titanium‑diffusion or proton‑exchange techniques to fabricate optical waveguides, enabling either dual‑polarization or single‑polarization phase modulation. Featuring low insertion loss, high modulation bandwidth, and a low half‑wave voltage, these devices are widely used in high‑speed optical communication systems for optical chirp control; in coherent communication systems for phase delay; for generating optical sidebands; in quantum communications for phase modulation; and for mitigating stimulated Brillouin scattering (SBS) in analog fiber‑optic communication systems. If you have specific requirements regarding operating wavelength, insertion loss, half‑wave voltage, or other parameters, please contact Chongfan customer service for customized consultation.

Fiber-Coupled Electro-Optic Phase Modulator

● High bandwidth: DC–300 MHz / 10 kHz–20 GHz optional

● Residual strength modulation <3‰

● Electrical interface: 2.92 mm / SMA

This series of fiber‑coupled electro‑optic phase modulators (EOPMs) covers three wavelength bands—730–880 nm, 960–1100 nm, and 1550 nm—and is suitable for applications in quantum optics, fiber‑optic sensing, laser frequency stabilization, coherent communications, and more. The entire product line delivers residual intensity modulation better than 3‰, optical return loss of −52 dB, and electrical return loss better than −12 dB. Operating bandwidths are available in three options: DC–300 MHz, 10 kHz–10 GHz, and 10 kHz–20 GHz, with corresponding rise times of 1 ns, 36–38 ps, and 20 ps, respectively. Half‑wave voltages (@50 kHz) span multiple settings from <3.5 V to 5.5 V, while insertion loss is ≤3 dB or 4 dB. Input impedances are 50 Ω (2.92 mm) or 1 MΩ (SMA), and maximum input optical powers are 20 mW, 100 mW, and 300 mW.
Note: 1. Shipping includes a BNC–SMA/2.92 mm RF cable (RF cables with different electrical interfaces must not be interchanged). 2. The input light source must be a polarization‑maintaining source, with a polarization extinction ratio greater than 23 dB (slow axis aligned). 3. When a large DC voltage is applied or when the optical power approaches the threshold, phase slip may occur. 4. Ensure that the input optical power does not exceed the rated value; otherwise, irreversible damage may result.

Fiber-coupled electro-optic modulator

Other Products

I want to consult

Submission