All Categories >

Product

+
  • 14b3f35faa8cdd533a8d843c540037a.png

TRB2 circular polarizer

The film circular polarizer is composed of a cascade of a polarizer and an achromatic 1/4 wave plate, and adopts a "sandwich" structure: that is, the polarizer and the broadband 1/4 wave plate are protected by two ultraviolet fused silica window plates in the middle. The contact surface between the window sheet and the air is coated with an antireflection film. The film circular polarizer is installed in a standard aluminum alloy snap ring with an outer diameter of 25.4mm or a standard SM series lens sleeve to ensure that the user will not apply additional stress to the polarizer film when installing the circular polarizer. The snap ring or sleeve side is laser marked with an arrow, pointing to the linear polarizer side, and the arrow is aligned with the polarization axis of the linear polarizer.

Classification:

Detail

Parameters

Technical Data

When using a circular polarizer:

1. The incident light is incident from the side of the polarizer (I. e., the side indicated by the arrow), and the outgoing light is converted into circularly polarized light. This approach can be used to generate circularly polarized light.

2. When the incident light is incident from the side of the 1/4 wave plate (I. e., the side facing away from the arrow), the outgoing light is converted into linearly polarized light. In this way, the circular polarizer can be used as a circular polarization analyzer: that is, one kind of rotation circularly polarized light passes through, and the other kind of rotation is blocked.

TRB2 circular polarizer

Other Products

I want to consult

Submission