02

2024

-

08

Shanghai Optical Machinery Institute has made important progress in error extraction and compensation of digital sub-aperture polishing system.

Author:


Recently, the research team of the High Power Laser Component Technology and Engineering Department of the Shanghai Institute of Optics and Mechanics of the Chinese Academy of Sciences has made important progress in the extraction and compensation of error perception in the digital sub-aperture polishing system. The multi-scale extraction and accurate compensation of system error based on data set and wavelet transform are proposed for the first time. The research was published in Optics Letters under the title "Data-based systematic error extraction and compensation methods based on wavelet transform in ultra-precision optical polishing.

With the development of modern optical technology, large optical systems such as large space telescopes, high-power laser systems, and lithography illumination and projection exposure systems have extremely high requirements on the surface quality and productivity of various optical components. However, the error sources in the manufacturing process of digital sub-aperture polishing are complex, it is difficult to compensate by physical modeling, and the existence of systematic polishing error is difficult to meet the manufacturing requirements of low cost, high precision and high efficiency of optical components.

The researchers proposed a data set-based system error extraction and compensation scheme to improve the polishing accuracy of optical components. In order to minimize the system error and improve the extraction quality under the condition of small data set, the wavelet transform multi-scale extraction technology is introduced in the extraction process, and the uncertainty of system error extraction caused by the relative detection of interferometer is solved by L1 norm optimization. The researchers used two typical error sources (edge error caused by the loss of edge polishing liquid and industrial robot trajectory error) to verify the effectiveness of the proposed scheme. The experimental results show that after edge compensation, the root mean square value (RMS) of the 85 mm mirror surface shape is reduced from 0.069λ to 0.017λ, the RMS of the 610 × 440 mm transmission mirror surface shape is 0.019λ, and the polishing accuracy is improved by more than 4 times. After compensation of industrial robot trajectory error, the RMS of the surface shape of the transmission mirror with an effective aperture of 480 × 360mm reaches 0.011λ, and the polishing accuracy is improved by more than 2 times. In addition, the error extraction and compensation methods mentioned in the article are also applicable to other types of system errors. The research results have important value for the high-efficiency and deterministic manufacturing of ultra-precision optical components.

Fig. 1.(a) Initial face type 1;(B) Schematic diagram of edge error generated after processing initial face type 1;(c) Initial face type 2; (d) Schematic diagram of industrial robot trajectory error generated after processing initial face type 2;

Figure 2. Extraction and compensation results of Φ85mm mirror edge error.

 

Figure 3.610 x 440 mm transmission mirror edge error extraction and compensation results.

Figure 4. Effective aperture 480 × 360mm transfer mirror industrial robot trajectory error extraction and compensation results.

The relevant work has been supported by the key R & D plan of the Ministry of science and technology, the National Natural Science Foundation of China, the Shanghai star sailing plan, and the Youth Innovation Promotion Association of the Chinese Academy of Sciences.

Chongqing Chongfan Technology Co., Ltd. Optical platform film thickness meter OCT optical coherence tomography LabVIEW control