Chongfan Technology
News
14
2024
-
06
Design of Distortion Elimination Panoramic Imaging System
Author:
AbstractThe single-view catadioptric panoramic imaging system has a large distortion, and the distortion-free imaging of the catadioptric panoramic imaging system can be effectively realized by calculating the mirror surface type. On the basis of the linear relationship between the incident angle and the reflection angle of the mirror, the formula of the mirror surface type suitable for the anti-distortion catadioptric panoramic imaging is derived. In order to illustrate the accuracy of the mirror surface type, an anti-distortion imaging catadioptric panoramic imaging system with F# as the 3.3 and 138 field of view is designed, and the anti-distortion design of the system is realized by using the coordinate mapping relationship between the actual image plane and the virtual image plane. The MTF of each field of view reaches 0.6 at the Nyquist frequency, and the relative distortion of the edge field of view is less than 4%. The results show that the surface type can realize the distortion-free catadioptric panoramic imaging, and the reflection angle ray tracing method is suitable for the distortion evaluation of the catadioptric panoramic imaging system, which provides the necessary model and calculation method for the distortion-free design of the catadioptric panoramic imaging system.
KeywordsOptical design; catadioptric panoramic imaging; anti-distortion imaging; mirror surface type
Introduction
A panoramic imaging system refers to an optical system capable of obtaining a hemispherical field of view greater than 180 ° or a full 360 ° field of view in a horizontal or vertical direction. The traditional optical imaging system follows the central projection method, the central projection is to imitate the way of human observation of the outside world, to observe the object near the big and far small, to achieve surface-to-surface imaging. The rotating scanning technology, multi-lens stitching technology and fisheye lens all use the traditional central projection method to realize panoramic imaging. The plane cylindrical projection method refers to the establishment of a new projection relationship between the three-dimensional space field of view and the limited two-dimensional image plane, and the three-dimensional cylindrical region is projected to the two-dimensional plane ring region through a special system, as shown in Figure 1, adding a reflective surface in front of the regular imaging system can achieve the purpose of cylindrical projection. The catadioptric panoramic imaging system uses a combination of a mirror and a regular imaging system to achieve imaging with a large hemispherical field of view, as shown in FIG. 2. Compared with the traditional rotation scanning technology, multi-lens stitching technology and fisheye lens to achieve large field of view imaging, catadioptric panoramic imaging system has the advantages of good real-time imaging, small size, light weight, low cost and so on. It has developed rapidly in recent years and has a very broad application prospect in national defense, civil, medical and other fields, such as aircraft detection pods, tank detection and observation, robot vision, scene surveillance, video conferencing, etc.

Figure 1. Schematic diagram of plane cylindrical projection method

Figure 2. Schematic diagram of catadioptric imaging system
The catadioptric panoramic imaging system consists of a mirror and a regular imaging system. According to the projection imaging model, it can be divided into parallel projection imaging and perspective projection imaging, and according to whether the system meets the single-view constraint, it can be divided into single-view panoramic imaging and non-single-view panoramic imaging. The light before the reflection of the mirror is called the incident light, and the light after the reflection of the mirror is the reflected light. Assuming that the imaging lens group meets the aperture imaging model, if the reflected light passes through the aperture and the incident light intersects at one point, this point is called a single viewpoint. When the extension of the incident ray passes through a single viewpoint, the single-viewpoint constraint condition is satisfied, and Nayar deduces the single-viewpoint constraint equation, in which the reflector with the surface type of ellipsoid, double surface and paraboloid can meet the single-viewpoint constraint condition. The mirror surface of single-view panoramic imaging is quadric surface, which is easy to design and process, but the problem of large field of view distortion still exists. Chahl et al. first proposed the design idea of non-single-view panoramic imaging in 1997. The mirror surface type is designed by using the linear relationship between the image point coordinates and the incident angle, and the distortion elimination design of the imaging system is completed in the state of large field of view. The mirror surface type of non-single-view panoramic imaging is usually a high-order rotationally symmetric aspheric surface.
In this paper, using the design idea of non-single-point distortion-eliminating panoramic imaging, the formula of the mirror surface type of the anti-distortion reflection panoramic imaging is derived, the example design is carried out by optical design software, and the imaging distortion is evaluated by the reflection angle ray tracing method.
1 Distortion elimination mirror surface design method.
The catadioptric panoramic imaging system consists of a rotationally symmetric mirror and a conventional imaging lens group, and the imaging lens group is assumed to meet the pinhole imaging model, as shown in FIG. 3.

Figure 3. Diagram of ray geometry of catadioptric imaging system mirror
3 Conclusions
Based on the perspective imaging relationship between the image point coordinate and the mirror reflection angle and the linear relationship between the mirror angle and the reflection angle, the mirror surface type formula of the anti-distortion imaging catadioptric panoramic imaging system is derived. Under the condition of inputting the initial parameters, the surface type of the anti-distortion imaging mirror is calculated according to the formula. The anti-distortion imaging catadioptric panoramic imaging system is designed using the derived mirror surface type, and the distortion evaluation is carried out using the reflection angle ray tracing method. The evaluation results show that the mirror surface type used in the system can realize the anti-distortion catadioptric panoramic imaging.
Chongqing Chongfan Technology Co., Ltd. Optical platform film thickness meter OCT optical coherence tomography LabVIEW control
LATEST NEWS
Thank you for visiting the official website of Chongfan Technology. If you have cooperation intentions or suggestions, please contact us through the following methods, and we will reply as soon as possible, thank you!
Address: Room 403, Building 6, Phase III of R&D, No. 36 Xiyong Avenue, High tech Zone, Chongqing, China.
Telephone: +86-13658337211
E-mail: Sales@cfkeji.net
Website: www.cfkeji.net
Mobile Version