Product
TA type desk active vibration isolation
Classification:
Detail
Parameters
Technical Data

For the convenience of customer installation and use, the TA desk type active vibration isolation system is a specially designed active vibration isolation system for lightweight instruments and equipment in the laboratory. It is a compact desk type active vibration isolation device that integrates automatic height adjustment, automatically adjusting to the working height according to different loads. For vibration energy in the frequency band greater than 5Hz, there is 90% amplitude attenuation, and for vibration energy in the frequency band greater than 10Hz, there is 98% amplitude attenuation. Usually suitable for scenarios with compact workplaces and lightweight equipment, different models can choose from external dimensions, weight, and load-bearing capacity. TA type products are easy to install and only require simple foot adjustments.
Vibration, especially low-frequency vibration, has a significant impact on the interference of electron microscopes. In use, electron microscopes are easily affected by environmental factors due to their high resolution and image resolution ability. Beam control is a key factor device for resolution and imaging quality. Low frequency ground vibrations may affect the quality of the image, thus limiting their amplification effect. These environmental issues may slow down your research progress and results, and even result in the inability to use a microscope during certain periods. Liansheng Technology can provide low-frequency ground isolation solutions according to different environmental conditions, allowing your electron microscope and ion beam instrument to perform to the extreme, helping your instrument achieve clear resolution and rigorous beam control functions.
Product specifications
TA400 (external dimensions: 450X400X100)
TA600 (external dimensions: 600X500X100)
TA800 (external dimensions: 800X600X115)
performance index
Rated voltage: 220V
Rated power: 50W
Working temperature: 5 ℃~40 ℃
Response time: 10-20ms
Working environment: placed on a hard surface with a flatness of ≤ 0.5mm
Isolation frequency: 0.7-200Hz
Isolation direction: Compensation of six degrees of freedom forces, load adjustment function
Vibration isolation performance: > 5HZ 90%; > 10HZ 98%
application area
Scanning Probe Microscope (AFM/LFM/STM)
Laser interferometer
Laser confocal microscope
Instruments and equipment with high vibration requirements
Other Products
I want to consult