All Categories >

Product

+
  • 阻尼隔振光学平台.jpg

Damping vibration isolation optical platform

With the introduction of advanced vibration isolation technology from Japan, the solid rubber vibration isolator can realize the natural frequency below the theoretical value of 10Hz. It has a magnetic conductive stainless steel table top and is matted with grain. The inside of the table top is designed with an isolation cup to prevent liquid or other impurities from entering the honeycomb layer. The table top has M6 threaded holes and is distributed in a 25mm × 25 mm array for experimental use.

Classification:

Detail

Parameters

Technical Data

Offers damping vibration isolation series optical platform combined with Japan's advanced vibration isolation technology. The table top is precision machined and matte finish, which can guarantee the flatness of 0.05mm/㎡ and the roughness requirement of 0.8 μm. The rack is divided into four support and six support structures according to different table specifications, and the rigid structure is composed of connecting rods. The top of the frame support contains a solid rubber damping vibration isolator, which itself has a certain damping, and has a better resonance suppression effect near the resonance point. It has a good vibration isolation effect on medium and high frequency vibration. Suitable for medium and small equipment and instrument vibration isolation, applicable frequency range of 15~200Hz. The solid rubber damper has good vibration isolation performance not only in the axial direction, but also in the lateral and rotational directions. The internal damping of rubber is much larger than that of metal, and the high frequency vibration isolation performance is good. Integrated horizontal feet and casters at the bottom of the platform rack can meet the different space requirements of the laboratory. The table top is composed of high magnetic permeability stainless steel top plate, isolation cup layer, middle honeycomb layer and bottom plate steel layer, which prevents liquid and impurities from penetrating into the honeycomb structure and prevents the convection of gas between the threaded holes. The lower frame of the table is a damping vibration isolation system, which can effectively reduce the vibration above the natural frequency.

Table threaded hole specifications: M6

Tabletop threaded hole spacing: 25mm × 25 mm

Overall height: 800mm (customizable)

Folding casters design, easy to move

Vibration isolation type: solid rubber damping vibration isolation

High-precision damping and vibration isolation series optical platform, the platform table is a 5 mm thick magnetic stainless steel top plate, and the top is precision machined and matted to ensure 0.05mm/㎡ flatness and 0.8 μm roughness requirements. The thickness of the table top is 200 mm or 300mm, and the table top has M6 threaded holes with a spacing and hole depth of 25mm.

LBTEK has launched optical platforms from 1200 mm x 900 mm to 4000 mm x 1500 mm in size. If you have other special size customization, splicing platform, non-magnetic platform and other customization requirements, please contact online customer service.

 

阻尼隔振光学平台

 

阻尼隔振光学平台

阻尼隔振光学平台

Damping vibration isolation optical platform

Other Products

I want to consult

Submission