All Categories >

Product

+
  • yz.jpg

High quality edge pass filter

The high-quality short-wave pass filter can transmit light below the initial (cut-off) wavelength. one side is coated with a filter film and the other side is coated with an AR film. it has high transmittance for light less than the initial (cut-off) wavelength and can inhibit light greater than the initial (cut-off) wavelength. its cut-off band optical density can reach OD 5, I .e. transmittance <0.001%. The high-quality edge-pass filter is pre-installed in a black anodized aluminum ring, and the shell is marked with an arrow with the incident direction for easy installation and use.

Classification:

Detail

Parameters

Technical Data

Pass band transmittance> 90%

Cut-off band optical density> OD 5

Long wave pass, short wave pass optional

The high-quality edge pass filter uses ultraviolet fused silica as the substrate, one side is coated with a filter film, the other side of the short wave pass is coated with an AR film, the other side of the long wave pass is not coated, and the arrow points to the surface coated with the filter film (it is recommended to enter from this side), which can make part of the wavelength light pass through and the other part of the light is suppressed, and has the characteristics of high transmittance and high cut-off rate. LBTEK high-quality edge-pass filter has a transmittance of> 90% in the passband wavelength range and an optical density of> OD 5 in the cutoff band wavelength range. The high-quality edge-pass filter is pre-installed in a Ø25.4mm black anodized aluminum ring for easy installation and use.

优质边通滤光片

 

优质边通滤光片

优质边通滤光片

High quality edge pass filter

Other Products

I want to consult

Submission