Product
Nd:YAG harmonic spectroscope
Classification:
Detail
Parameters
Technical Data
When using Nd:YAG laser applications, it is often necessary to distinguish the fundamental frequency of the output laser from each frequency-doubling component. LBTEK Nd:YAG harmonic beam splitter is based on the transmission and reflection effects of different optical coatings on different wavelengths. Its incident surface is coated with a beam splitter, which can effectively separate the harmonics of Nd:YAG laser. The exit surface is coated with a V-shaped anti-reflection film, which can minimize the reflection at the interface between air and glass in the specified wavelength band (compared with the typical reflectivity of 4% on the surface of uncoated optical elements, the anti-reflection film can reduce the average reflectivity of each surface to less than 0.5% in the specified band), and with the wedge mirror structure design of 30 arc minutes, it can effectively reduce the interference effect of reflected light from the incident surface and the exit surface. LBTEK provides Nd:YAG harmonic spectroscopes with four wavelength configurations, namely: 1064 nm reflection, 532 nm transmission; 532 nm reflection, 1064 nm transmission; 355 nm reflection, 532 nm & 1064 nm transmission; 266 & 355 nm reflection, 532 nm & 1064 nm transmission. And provide two sizes: diameter Ø12.7mm and Ø25.4mm optional.


ND:YAG harmonic spectroscope
Definition of 1.
Harmonic beam splitter is designed based on the transmission and reflection effect of optical coating on light of different wavelengths. Its incident surface is coated with beam splitter film, which can effectively separate the harmonics of Nd:YAG laser. The exit surface is coated with V-type anti-reflection film, which can reduce the reflectivity of the rear surface to less than 0.5.

2. features
1. The front and rear surfaces are respectively coated with light splitting film and reflection enhancement film;
2. The front and rear surfaces are designed with 30 arc minutes to separate the emitted light and the reflected light;
3. Separation of Nd:YAG laser harmonics.
3. Description
These harmonic beam splitters are designed to separate the harmonics of the Nd:YAG laser at 45 ° incidence. It can provide high reflectivity (99%) and transmittance (95%) at a specific wavelength. The rear surface is coated with a V-type anti-reflection film to minimize the loss caused by reflection. The front and rear surfaces are designed with wedge angles to reduce the interference effects of rear surface reflections.

Figure 2. Wedge angle design reduces the influence of rear surface reflection interference.
UV-grade fused silica is a synthetic amorphous silica with extremely high purity, which has high transmittance from ultraviolet to near infrared. This colorless amorphous silica glass combines an extremely low coefficient of thermal expansion with good optical properties and has excellent transmittance in the ultraviolet region. Uniformity exceeds that of crystalline quartz, and the orientation and temperature instability problems inherent to crystal morphology are absent. It does not fluoresce under ultraviolet light and is resistant to radiation.
The reflection and transmission at non-specified wavelengths are indefinite and may be quite different from the curves shown. It is recommended to use a Nd:YAG harmonic spectroscope at the design wavelength.
Previous
Next
Previous
Next
Other Products
I want to consult