All Categories >

Product

+
  • b6ecd126-3fe6-47bc-9a6a-61decdd49a57.png

Fixed-magnification beam expander: Achromatic

Beam expansion factors of 2×, 3×, 5×, 10×, 15×, or 20×; a sliding‑lens design for collimation adjustment; three broadband enhanced coating options available.

Classification:

Detail

Parameters

Technical Data

Characteristics

  • ● Beam expanders or beam reducers are available in 2X, 3X, 5X, 10X, 15X, or 20X options.
  • ● Three types of broadband anti-reflective coatings are available
  • ● A: 400 - 650 nm
  • ● B: 650 - 1050 nm
  • ● C: 1050 - 1650 nm
  • ● Sliding lens adjustment can minimize beam walk-off effects.
  • ● The housing has a fixed mechanical length, and its ends are non-rotatable.
  • ● The collimation adjustment ring can be locked using the included hex wrench.
  • ● When the large aperture is used as the input, it can be employed to reduce the beam size.
  • ● Threaded hole diameters are easily integrated into optical systems.

Chongfan Technology’s Galilean achromatic beam expanders with anti-reflective coatings can increase or decrease the diameter of a collimated beam by factors of 2, 3, 5, 10, 15, or 20. These beam expanders employ a low‑aberration achromatic design that has been optimized to deliver wavefront errors below λ/4—corresponding to diffraction‑limited performance—while minimizing the impact on the expanded beam’s M² value. The expanded beam can be focused into a narrower, diffraction‑limited beam waist, making it ideal for optical components or instruments with small input apertures (such as our…). Fabry–Pérot interferometer )This narrower waist cincher may be required.

These beam expanders utilize achromatic lenses and lens assemblies made from N‑BK7 and N‑BASF2. To minimize reflection at the air–glass interface, the optical elements in these devices are coated with one of three anti‑reflection coatings, applied to both sides of each lens as an integral part of the design: 400–650 nm (product model numbers ending in –A), 650–1050 nm (product model numbers ending in –B), or 1050–1650 nm (product model numbers ending in –C). Compared with the typical 4% reflectance of uncoated optics, these anti‑reflection coatings reduce the average surface reflectance to less than 0.5% across the specified wavelength range. For additional details on coating performance, please refer to the specifications and the anti‑reflection coating data sheet.

The sliding‑lens design minimizes the beam‑walk‑off effect inherent in lens adjustments during collimation. The red ring is used to adjust the output beam’s collimation, as shown in Figures 1.1 and 1.2; once the desired collimation is achieved, the ring can be locked by tightening the included 0.05‑inch hex wrench on the locking screw. The housing is engineered so that the collimation‑adjustment ring does not rotate when turned, allowing users to fine‑tune divergence without disturbing any already‑installed optical components and maintaining pointing stability.

Installation Features

These Galilean beam expanders feature threaded input and output apertures, allowing other lenses and filters to be easily mounted along the expander’s optical axis. The input end of each expander is equipped with an SM05 (0.535”-40) internal thread and an SM1 (1.035”-40) external thread, enabling straightforward compatibility with… Thorlabs lens tubes Used in conjunction with other optical components. The output of the 2× beam expander features an SM1 external thread; beam expanders with 3×, 5×, or 10× magnification have an M43 × 0.5 external thread at their output, allowing them to be utilized… SM2A30 Adapter and SM2 (2.035"-40) Threaded Integrated Assembly . 2X, 3X, 5X, and 10X beam expanders feature a Ø1.2-inch diameter tube, providing compatibility with Ø1-inch lens sleeve Smooth mounting surfaces with the same outer diameter. The 15× and 20× beam expanders feature SM2 external‑threaded output ports, and their housing mounting surfaces have a wider Ø2.2‑inch cross‑section, matching the outer diameter of Ø2‑inch lens tubes.

The post-mounting options include the SM1RC(/M) lens tube slip ring and the SM1TC lens tube clamp. Additionally, beam expanders ranging from 2× to 10× can be mounted via the CP36 30 mm cage plate or by using the SM2A21 mounting adapter with… LCP35 60 mm cage plates are integrated into our cage system. 15X and 20X beam expanders can be directly mounted onto the 60 mm cage system using the LCP36. We also offer the SM1A52 adapter, which enables compatibility with components that use the M30 × 1.0 thread standard.

Chongfan Technology also offers many other types of beam expanders, including those for narrow-band applications. UV Fused Silica Fixed-Magnification Beam Expander , for mid-infrared applications Fixed-Magnification Beam Expander or featuring a reflective design to address chromatic aberration issues Reflective Beam Expander . We also offer variable-magnification beam expanders, including our Ultraviolet Fused Silica or Achromatic Zoom beam expander.

 

Installation accessories

Fixed-magnification beam expander: Achromatic

Other Products

I want to consult

Submission