All Categories >

Product

+
  • 03a6bcf9-3308-4b13-a97f-02f711b51c28.png

Laser-Pumped Phosphor Broadband Light Source

Laser-Pumped Phosphor Broadband Light Source: −10 dB wavelength range: 490 to 625 nm; open-loop, closed-loop, and external trigger modes; up to 10,000 hours lifetime; SMA905 fiber-coupled output

Classification:

Detail

Parameters

Technical Data

The emission wavelength range of the laser-pumped phosphor spans from 490 to 625 nanometers.

● 25 mW output (open-loop mode)

● 0.03% per hour and < 0.1% per degree Celsius output power drift (closed-loop mode)

● Online installation Ø1 inch or Ø25 mm Filter

● SMA905 fiber-coupled output (fiber patch cord sold separately)

● Includes a power cord that complies with the requirements of a specific region.

Chongfan Technology’s SLS701 laser‑pumped phosphor light source (U.S. Patent No. 10,317,046) delivers stable illumination across a wavelength range of 490 nm to 625 nm. An internal 445 nm pump laser is focused onto a single‑crystal phosphor, generating a very small spot that emits incoherent, broadband light with a narrow spectral width. This enables laser‑level high radiance output at the fiber‑optic connector. A photodiode detects the off‑axis emission light, providing feedback for closed‑loop operation and enhancing power stability over time and temperature variations. The emitted light is coupled into an SMA905 connector designed for connecting fiber‑optic patch cords. For detailed information, please refer to Figure 1.3. Fiber‑optic patch cords are not included; recommended cables can be purchased below.

The control buttons and LCD display on the front panel provide full access to power settings, light intensity, open-loop and closed-loop operating modes, as well as the ability to enable or disable external trigger inputs. The rear panel features multiple BNC connectors for external triggering and power modulation inputs, along with a monitoring output and a USB port. In… Software Under the “Tags” section, you can download a software GUI that provides remote control functionality identical to the front-panel features. Additionally, via a USB connection and with a terminal emulator or a user‑developed application, command-line operation is also supported.

As shown in Figure 1.2, the right-hand panel features a filter holder that can accommodate either a Ø1‑inch or a Ø25‑mm filter of the user’s choice. As illustrated in Figure 1.3, this optional filter is positioned directly in front of the fiber‑coupling lens.

                                                                                                                                                                                     

Laser-Pumped Phosphor Broadband Light Source

Other Products

I want to consult

Submission