All Categories >

Product

+
  • 1735446518001.jpg

Mid-infrared supercontinuum laser NBSCF-1721C

Classification:

Detail

Parameters

Technical Data

  • Wavelength coverage range of 1.3 - 4.5 μm (7700 - 2200 cm)-1)
  • >300 mW average output power
  • Single-mode collimated output beam
  • Low noise: 0.025% (typical value)
  • 300 mW output power across the entire bandwidth range
  • >110 mW output power, exceeding 2.2 - 4.2 μm
  • 0.025% (typical value) intensity noise enables high sensitivity measurements
  • Femtosecond pump architecture minimizes shot-to-shot noise
  • Robust all-fiber design, no intervention required, reliable operation
  • Record high brightness supports remote and long-distance detection
  • Compatible with standard Fourier transform infrared spectrometers (FTIRS)
  • Provides water cooling for vibration-sensitive applications (contacttechnical support)
  • The mid-infrared supercontinuum laser source is the world's first commercially available femtosecond laser-pumped light source. This supercontinuum laser has an emission wavelength range of approximately 1.3 μm to 4.5 μm (7700 cm-1to 2200 centimeters-1), with an average output power of >300 mW in a single-mode collimated beam. Output power exceeding 110 mW is in the range of 2.2 - 4.2 μm
    (4500 cm
    -1-2400 centimeters-1) range, which overlaps with many gas absorption lines and other molecular features. The pulse femtosecond oscillator driving the supercontinuum spectrum operates at a fixed repetition rate of 50 MHz. The brightness of the SC4500 laser is several orders of magnitude higher than traditionalGlobarsand even synchrotron sources.

    The laser cavity can be purged through an inlet located on the back panel of the laser head. The gas supply connected to this inlet causes gas to flow through the internal beam path of the laser to reduce unwanted absorption lines in the environment. This gas supply should not be pressurized. The output port of the SC4500 includes a KF16 vacuum-compatible flange for connecting the output to other instruments or devices with purging capabilities.

    Supercontinuum light is generated through pumping dispersion-engineered indium fluoride (InF3) fibers with high-powerfemtosecond fiber lasers.Unlike supercontinuum lasers pumped in the long pulse range (picoseconds to nanoseconds), the spectrum of femtosecond-pumped sources is stable between pulses. Therefore, our supercontinuum lasers can provide a typical output noise of 0.025% (RMS; 10 Hz to 1 MHz), greatly assisting applications that require high sensitivity detection.

Mid-infrared supercontinuum laser NBSCF-1721C

Other Products

I want to consult

Submission