Product
Detail
Parameters
Technical Data
- General telecommunications tunable laser for C band or L band
- +13 dBm laser, 10 kHz linewidth, low noise
- Built-in variable optical attenuator for power control
- Jitter function stabilizes wavelength
- The telecom laser can be tuned on the ITU 50 GHz grid.
- TLX1: 1528 - 1566 nm (C band)
- TLX2: 1570 - 1609 nm (L band)
- Narrow 10 kHz linewidth
- +13 dBm output power and low noise operation
- Built-in variable optical attenuator (VOA) for automatic or manual power control
- Frequency offset options for ±30 GHz fine-tuning in 1 MHz increments
- Frequency jitter options help with wavelength stability
- Temperature-controlled external cavity laser with isolator
- Fully PM fiber path
- Control via an intuitive touchscreen interface or remote control using USB or RS-232 connection
The light emitted by these tunable laser sources can be tuned within the commonly used telecom wavelength range. They are used for research and design, manufacturing testing, and implementation of all-optical links in wavelength division multiplexers (WDM) and related components. TLX1 emits in the C band, while TLX2 emits in the L band. The optical output has a typical narrow linewidth of 10 kHz, and operating with frequency jitter options stabilizes the laser wavelength. The wavelength tuning resolution is 50 GHz; these lasers also have fine-tuning frequency offset capabilities, allowing offsets from -30.000 GHz to +30.000 GHz in 1 MHz increments. The built-in variable optical attenuator provides complete control over optical output power, which can operate in constant attenuation or constant power mode. For complete specifications.
The fiber path from the internal laser module to the optical output port is fully polarization-maintaining (PM), and all external optical connections use FC/PC connectors. As shown in the figure above, the emission from the internal laser is coupled to the laser output port. Users can choose to couple this emission to the VOA In port via the included PM loopback cable, or users can choose to couple an external laser to the VOA. The maximum input power of the laser into the VOA In port should be 20 dBm (100 mW), and the light should be linearly polarized along the slow axis (aligned with the connector key). SeeFront and rear panelsTabs for detailed information about input and output ports.
These laser sources can be controlled in two ways. The simplest method is to use the intuitive touchscreen interface, which allows users to have full control over all instrument functions. These instruments can also be operated remotely via RS-232 or USB ports on the rear panel."Operation" tab describes the graphical user interface (GUI) and user-customizable features.

Other Products
I want to consult