Product
CF-NIR Fiber Optic Fourier Transform Near Infrared Spectrometer
Classification:
Detail
Parameters
Technical Data
The CF-NIR fiber optic Fourier transform near-infrared spectrometer is a fiber optic spectrometer with a range of 0.9-2.6 um, featuring high performance, compact design, and cost-effectiveness. It uses a permanently calibrated interferometer and solid-state reference laser to ensure high stability in wavelength and intensity.
CF-NIRThe principle of Fourier transform allows it to measure over a wider range than grating spectrometers. Its excellent stability in wavelength and intensity scaling makes it an ideal tool for high repeatability chemometric analysis.
Compared to array photodiode near-infrared spectrometers,The FT-NIR's single photodiode detection ensures no defective pixels, no gain variation between pixels, and no dark current drift.In addition, this device is not affected by stray light like grating spectrometers.
1. Applications
1. Biomedical and life sciences
2. Food and agriculture
3. Material identification
2. Features
1. Wide wavelength range0.9-2.6μm
2. High resolution4cm-1 (equivalent to <0.5nm@1um; <2.5nm@2.5um)
3. Excellent stability in intensity and wavelength range(no drift caused by dark current, internal reference laser)4.
High sensitivity(can use thermoelectrically cooled InGaAs detector)5. Compact structure, usable fiber optic input
6. Economical and efficient
(single-point near-infrared photodiode)(单点近红外光电二极管)
Interferometer type:Permanent calibration, dual-angle cubic interferometer
Spectral range [cm-1]:3800 - 11000
Spectral range [nm]:900 - 2600
Wavenumber spectral resolution:4cm-1
Signal-to-noise ratio: (8cm-1 resolution, 1 minute scan) >200'000:1
Long-term baseline intensity stability:
< 2% (1100-2500nm) 10 hours
Wavenumber repeatability:< 10ppm
Detector:Extended InGaAs PIN photodiode, optional 2TE cooling
Effective test time:1 spectrum per second in continuous acquisition mode
Fiber interface:SMA 905
Input light port:< 1mm (fiber core diameter)
NA=0.25
Reference laser solid-state laser:795nm
A/D conversion:24 bit
Power:7.5 - 12V / 1-6W depending on model
Operating temperature:5°C-40°C
Communication interface:USB 2.0 (network connection optional)
Software:Win 7 & 10 system operating software
API can control the instrument via DLL
Dimensions:180mm x 160mm x 80mm
Weight:1700g

Other Products
I want to consult