18

2024

-

07

Diffraction Limit: From Human Vision to Microscopy

Author:


1. human visual resolution

Have you ever noticed such an interesting phenomenon while walking at night? When you look at the nearby street lights, you can clearly distinguish the lights on both sides of the exit light pole. However, as you look at the distance, the street lights on both sides seem to slowly move closer together, and finally even become a fuzzy light point (Figure 1).

This phenomenon actually reveals an interesting limitation of our human eyesight. Simply put, when two objects get too close together, our eyes can't tell them apart. Think of here, we can not help but began to think: why our eyes have such limitations?
 
In fact, how much detail we can see with our eyes depends mainly on two factors: one is the structure of the eye itself, and the other is the characteristics of light.

 

Our eyes have a structure called the retina. In this layer of the retina, there are two particularly important cells:

Rod cells: primarily responsible for capturing light in low light conditions.

2. Cones (Cone cells): responsible for distinguishing colors and perceiving bright light.

The scientists used a scanning electron microscope (SEM) to look at the retina and found that these optic cells were about 2 microns in diameter [1]. Similar to CCD, the higher the density of cone cells, the higher our visual resolution.

However, the resolution of the human eye is not only determined by the visual cell density, but is also limited by optical principles. When light passes through the small hole in the pupil, it happens.Diffractionphenomenon. Diffraction causes a point source of light to form a pattern on the retina called"Airy spot"A spot of light, not a clear spot. The size of this spot limits the smallest detail our eyes can distinguish.

 

Diffraction of 2. Light and Airy Spot

1. Diffraction of light

 

When light passes through the small hole of the pupil, diffraction occurs. Diffraction is a manifestation of the fluctuating nature of light, which occurs when light passes through a tiny opening or encounters the edge of an obstacle.

To better understand diffraction, we can look at how this phenomenon is observed in the laboratory:

1. In the absence of obstacles, the beam emitted by the laser is a bright spot (Figure 3a).

When the laser hits a slit, we see a long, thin streak of light and dark on the screen (Figure 3b). This is the single slit diffraction.

3. If we replace the slit with a square hole, we will see two sets of light and dark stripes crossing vertically (Figure 3c).

4. The closest to the shape of the human eye pupil is the circular hole. As the laser passes through the circular hole, we see a series of concentric light and dark rings on the screen (Figure 3d). This pattern is the "Airy spot" we mentioned earlier ". Airy spot was named after Sir George Biddell Airy, Astronomer Royal. Because he gave the first theoretical explanation of this phenomenon in 1835 [2].

The pupil of the human eye is like a small round hole, and when light passes through it, it produces a diffraction pattern similar to Figure 3d. The size of the central bright spot in this diffraction pattern determines the smallest detail we can resolve.

2. Airy spot and Rayleigh criterion

In the above, we have discussed the limiting factors of human visual resolution, especially the diffraction effect of light. In an ideal optical imaging system, the image formed by a point light source on the imaging plane should be a small bright spot. However, due to the diffraction effect of light, when light passes through a circular aperture such as the pupil, the image of a point light source on the retina is not an infinitely small point, but a bright spot of finite size, surrounded by a series of bright and dark rings, which is called the Airy spot.

The existence of the Airy spot means that even an ideal point light source, its image on the retina has a certain size. This limited size of the image limits the resolution of the human eye. When two point light sources are very close together, the Airy spots they form on the retina overlap, which affects our ability to distinguish them. This is the effect of diffraction on the visual resolution of the human eye.

In order to measure the resolution of optical instruments (including the human eye), we introduce the concept of minimum resolution angle. The minimum resolution angle refers to the minimum angle formed by the optical instrument that can distinguish two small objects at a distance. It reflects the instrument's ability to distinguish details. The smaller the minimum angle of resolution, the higher the resolution of the instrument. However, the minimum resolution angle of the optical instrument is limited by the diffraction effect.

In 1879, the British physicist Rayleigh proposed an important optical resolution standard, later known as the Rayleigh criterion: when the center of an Airy spot falls on the first dark ring of another Airy spot, the two point light sources can just be distinguished [4]. The Rayleigh criterion gives the critical condition under which two point light sources of equal intensity can be resolved in the diffraction limit. According to this criterion, we can calculate the minimum resolution angle θ≈ 1.22 λ / D for optical instruments (including the human eye), where λ is the wavelength of light and D is the instrument aperture. Limited by the diffraction effect, the minimum resolution angle determines the limit resolution of the instrument.

For example, under ideal conditions, assuming that the average wavelength of visible light is 550nm and the pupil diameter is 2.5mm (in fact, the pupil diameter varies), the minimum resolution angle of the human eye is about 1 ′ (angular minutes, I .e., 1/60 ° or 0.017 °). This means that at a normal reading distance (about 25cm), the minimum size that the human eye can distinguish is 0.1mm, which is an approximation that helps us understand the limit of human visual resolution.

The Rayleigh criterion reveals the fundamental limitation of the diffraction effect on the resolving power of the optical imaging system, and gives the formula for calculating the limit resolution angle of the instrument. It is not only suitable for optical instruments such as telescopes, but also for human eyes. Rayleigh criterion is a milestone in optical theory and lays the foundation for understanding the resolution limit of optical imaging systems.