Chongfan Technology
News
11
2024
-
04
University of Electronic Science and Technology-Liu Ao & Zhu Huihui and Collaborators ︰ Nature: New Semiconductor Materials and Devices
Author:
1. research background:
Compared with polycrystalline semiconductor, amorphous system has many advantages, such as low cost, easy processing, high stability and large area manufacturing uniformity. However, the traditional amorphous hydrogenated silicon is in urgent need of exploring new materials due to the lack of electrical properties. Since the first report of amorphous N-type (electronic) indium gallium zinc alloy oxide thin film transistor (TFT) in 2004 (Nature 432, 488, 2004), it has greatly promoted the development of semiconductor electronics and a new generation of information display technology. However, the current development of amorphous P-type semiconductors with comparable performance is facing major challenges, which seriously hinders the development of new electronic devices and large-scale N-P of complementary metal oxide semiconductor (CMOS) technology. Due to the high local state valence band top and self-compensation effect, the hole transport efficiency of traditional oxide semiconductors is extremely poor, which is difficult to meet the application requirements. Researchers have therefore invested a lot of energy in the development of new non-oxide P-type semiconductors, but these new materials can only show certain P-type characteristics in the polycrystalline state. In addition, these materials also have inherent defects such as stability and uniformity, and are difficult to be compatible with existing industrial processes. In the past two decades, researchers in the field have continuously improved and optimized the "valence band orbital hybridization theory" to try to achieve P-type oxide-based semiconductors with high hole mobility, but with little success. This has also led to the general view of experts in the field that achieving high-performance amorphous P-type semiconductors and CMOS devices is an "almost impossible challenge".
2. article introduction:
Professor Liu Ao from the Institute of Fundamentals and Frontiers of the University of Electronic Science and Technology of China and Researcher Zhu Huihui from the School of Physics pioneered amorphous P-type (hole) semiconductor devices with high mobility and stability, breaking through the research bottleneck in this field for more than 20 years and will further promote modern information electronics And the development of large-scale complementary metal oxide semiconductor (CMOS) technology. The results were published in Nature. The results by the University of Electronic Science and Technology and South Korea Pohang University of Science and Technology to complete the joint cooperation. The first unit of the paper is the Institute of Fundamentals and Frontiers of the University of Electronic Science and Technology of China. Professor Liu Ao is the first author and corresponding author of the paper. Professor Zhu Huihui of the School of Physics of the University of Electronic Science and Technology of China and Professor Noh Yong-Young of Pohang University of Science and Technology of South Korea are the co-corresponding authors of the paper.

Figure 1. Structure and energy band analysis of a novel amorphous tellurium (Te)-based compound semiconductor.
3. research contents:
In this study, a novel design concept of tellurium (Te)-based composite amorphous P-type semiconductor is proposed, and the low-temperature preparation of thin films is realized by using an industrial process-compatible thermal evaporation process, which proves the feasibility of application in high-performance and stable P-channel TFT devices and CMOS complementary circuits. Through theoretical analysis, the highly dispersed valence band top and shallow energy level acceptor states composed of tellurium 5p orbitals are revealed, which lays an important foundation for sufficient hole doping and effective hole transport in amorphous systems (Figure 1). In addition, further research shows that the selenium alloying treatment can effectively adjust the hole concentration, and achieve a high-performance p-channel TFT device with a field-effect hole mobility of 15 cm²/Vs and a current-to-switch ratio of about 107. These devices exhibit good bias stress and environmental stability, as well as wafer scale uniformity (Figure 2). The tellurium-based material system is far superior to other reported emerging amorphous P-type semiconductor materials, and exhibits excellent economy, stability, scalability and processability, and its preparation process is perfectly compatible with industrial production lines and back-end integration technologies.

Figure 2. Device analysis based on a novel amorphous tellurium (Te)-based compound semiconductor.
4. summary and outlook:
This composite phase strategy brings new inspiration for the design of a new generation of stable amorphous p-type semiconductor materials. This research will start the research boom of P-type semiconductor devices and take an important step in establishing commercially viable amorphous P-channel TFT technology and low-power CMOS integrated devices.
LATEST NEWS
Thank you for visiting the official website of Chongfan Technology. If you have cooperation intentions or suggestions, please contact us through the following methods, and we will reply as soon as possible, thank you!
Address: Room 403, Building 6, Phase III of R&D, No. 36 Xiyong Avenue, High tech Zone, Chongqing, China.
Telephone: +86-13658337211
E-mail: Sales@cfkeji.net
Website: www.cfkeji.net
Mobile Version