Chongfan Technology
News
30
2024
-
07
Anisotropy-free arrayed waveguide grating (AWG) on Light | X-cut thin-film lithium niobate optical integration platform
Author:
In recent years, X-cut thin film lithium niobate (X-cut TFLN) photonic integration platform has attracted wide attention in industry and academia. It combines the high-speed, high-efficiency electro-optic response of lithium niobate material, high nonlinear optical coefficient and waveguide structure with high refractive index difference, which can greatly improve the interaction effect between light and lithium niobate material, and can realize electro-optic modulators and nonlinear optical devices with ultra-high bandwidth, ultra-small size and ultra-high efficiency. Further, a high-performance multifunctional optoelectronic chip can be constructed by integrating various passive devices.
However, unlike other common photonic integration platforms (silicon, silicon nitride, etc.), the lithium niobate material itself has obvious anisotropic optical properties, which makes the passive photonic device design of the X-cut thin film lithium niobate platform extremely challenging. Even a single straight waveguide, its mode field transmission characteristics are very different from the traditional material waveguide. How to achieve high-performance passive photonic devices on the X-cut thin film lithium niobate platform has not yet attracted widespread attention, but it has always been a difficult problem to solve.
Arrayed waveguide grating (AWG) is a very representative passive device with filtering function, which has the characteristics of multi-channel and scalability, and is widely used in wavelength division multiplexing systems, spectral sensing and other fields. At the same time, it is also the most complex structure and the most difficult to design a unit optical passive device. The performance of arrayed waveguide grating devices depends on the precise design and error control of the phase and coupling of the arrayed waveguide. At present, there is no experimental report of high-performance arrayed waveguide grating on X-cut thin film lithium niobate platform.
The research group of Associate Professor Liu Liu from the School of Optoelectronics of Zhejiang University joined the teams of South China Normal University and Hong Kong Polytechnic University"Anisotropy-free arrayed waveguide gratings on X-cut thin film lithium niobate platform of in-plane anisotropy"Published in the journalLight: Science & Applications.
In view of this, the researchers adopted a clever design method that circumvents the effects of anisotropy. The basic structure of the design array waveguide grating is as followsFigure 1(a)As shown, it consists of two star couplers and waveguide arrays of different lengths, located on the plane formed by the Z and Y crystal axes of lithium niobate (X-cut). The researchers analyzed the refractive index of the waveguide mode on the plane and found that although they have obvious anisotropy, the mode refractive index and the waveguide direction can better meet the square trigonometric function relationship. On this basis, the researchers placed the arrayed waveguide grating with the 45 ° axis as the axis of symmetry, suchFigure 1(c)shown. By curve integration of the array waveguide phase, it is found that the directional terms in both sides of the symmetry axis cancel each other out. That is, in this special placement, the anisotropic X-cut thin film lithium niobate platform can be achieved on the array waveguide grating design without anisotropy. Moreover, the design method can be applied not only to arrayed waveguide gratings, but also to other interference devices to eliminate the influence of anisotropy, and has a certain degree of versatility.

Figure 1:(a) Schematic diagram of an arrayed waveguide grating. (B) The effective (group) refractive index of the ridge (slab) waveguide in different directions on the X-cut thin film lithium niobate platform. (c) An arrayed waveguide grating symmetrical along a 45 ° axis.
Figure 2The experimental results of the arrayed waveguide grating prepared by the researchers based on this method are shown.Figure 2(a)For the preparation of 4 x 400GHz arrayed waveguide grating microscope image and part of the structure of the SEM image.Figure 2 (B)ForFigure 2(a)The corresponding four-channel spectral response has a minimum insertion loss of 2.4dB and an optimal crosstalk of -24.1dB.Figure 2(c)For another 8 × 200GHz eight-channel spectral response, the minimum insertion loss is 4.8dB and the best crosstalk is -22.8dB.

Figure 2:(a)4 × 400GHz arrayed waveguide grating microscope image and scanning electron microscope image of some structures. (B) Corresponding four-channel spectral response. (c) Eight-channel spectral response of an 8 × 200GHz arrayed waveguide grating.
In addition, in order to further verify the practical application of 8 × 200GHz arrayed waveguide grating, the researchers also built a wavelength division multiplexing optical interconnection system based on thin-film lithium niobate modulator and arrayed waveguide grating, suchFigure 3(a)shown. The eye diagram when testing the middle channel transmission and the three-way multiplexing middle channel transmission is shown inFigure 3 (B), and the bit error rate and signal-to-noise ratio when receiving optical power differently in these two cases are as followsFigure 3(c)and(d). 3.8 × 10-3The power penalty at bit error rate is about 0.8dB.

Figure 3:(a) Wavelength division multiplexing optical interconnection system composed of thin film lithium niobate modulator and arrayed waveguide grating. (B) eye diagram of the middle channel when the left and right adjacent channels are turned on or off, and (c) bit error rate and (d) signal-to-noise ratio under different received optical powers.
Summary and Prospect
Chongqing Chongfan Technology Co., Ltd. Optical platform film thickness meter OCT optical coherence tomography LabVIEW control
LATEST NEWS
Thank you for visiting the official website of Chongfan Technology. If you have cooperation intentions or suggestions, please contact us through the following methods, and we will reply as soon as possible, thank you!
Address: Room 403, Building 6, Phase III of R&D, No. 36 Xiyong Avenue, High tech Zone, Chongqing, China.
Telephone: +86-13658337211
E-mail: Sales@cfkeji.net
Website: www.cfkeji.net
Mobile Version